Connecteur pour ruban jusqu’à 20 mm Kerbl electric fence connector

Why use a connector for electric fence tape?

An electric fence tape is made of synthetic fibers into which several conductive metal wires are integrated.

These small conductors are responsible for carrying the impulses produced by the energizer.

When two tapes need to be joined, it's not enough for them to hold together mechanically; their electrical conductors must also be properly connected.

The Kerbl connector enables precisely this connection.

It holds the two sections of tape together while ensuring electrical continuity between them.

Why avoid tying a knot in an electric tape?

Tying two tapes together might seem like the quickest solution, but it's not a good method for connecting an electric fence.

The knot might hold the tapes together mechanically, but it doesn't guarantee sufficient connection between the different conductive wires.

It can also:

• distort the tape;
• create a stress point;
• promote wear;
• prevent some conductors from touching correctly;
• and cause a loss of transmission quality at the junction.

A proper metal connector ensures a much cleaner and more suitable connection for the functioning of an electric fence.

Preserve the conductivity of your fence

An electric fence should be considered as a whole.

Having a good energizer and quality tape is not enough. The various connections present on the line are also important.

Each poorly executed connection can create a point of resistance and reduce the quality of impulse transmission.

The longer the fence and the more connections it has, the more important it is to correctly execute each of these junctions.

The Kerbl connector allows you to connect the tapes without neglecting the electrical continuity of the installation.

Compatible with tapes up to 20 mm

This model is specifically designed for electric fence tapes with a maximum width of 20 mm.

It is suitable for thin and intermediate tapes used in many installations.

Before ordering your connector, simply check the width of your tape.

Maximum compatible width: 20 mm.

For wider tape, use a connector model that matches its width.

Ideal for connecting two rolls of tape

When you reach the end of a roll but need to continue the fence, the connector allows you to properly connect the new tape to the one already installed.

This lets you extend the line without replacing the existing conductor.

This use is particularly advantageous when creating large fences or when multiple rolls are needed to complete an installation.

A practical solution for repairing a tape

A tape can also be damaged or accidentally cut.

If the rest of the conductor is still in good condition, there's no need to replace the entire line.

The Kerbl connector allows you to join the two parts of the tape and restore a proper junction.

It's a useful accessory to keep with fence maintenance equipment to quickly intervene in case of a break.

For which electric fences?

This Kerbl connector is a general accessory for electric fences.

It can be used on any installation equipped with a tape compatible with up to 20 mm in width, especially for fences intended for:

• horses and ponies;
• cattle;
• meadows and pastures;
• paddocks;
• agricultural plots;
• private lands;
• and more generally, installations using electric tape.

It is suitable for both individuals and farmers, agricultural workers, and professionals.

Manufactured from galvanized steel

The connector is made from galvanized steel.

The zinc coating provides protection to the metal and makes the connector suitable for outdoor fence use.

This choice of material also ensures a metal connector that provides both mechanical support for the tapes and their electrical connection.

As with all connections in a fence, it is important to ensure quality and reliability. It remains advisable to periodically check its condition and its tightness.